Version: Fedora 11 (64-bit version)
• You can download the latest Fedora distribution at http://fedoraproject.org/en/get-fedora
• Download the LiveCD and select either 32-bit or 64-bit depends on your system.
• To test out this version of Fedora boot with LiveCD and preview the software without making any changes to the hard disk.
• You can check if any of your hardware is not being recognized, before you proceed for installation.
• Click the install option on the desktop after you are satisfy with the evaluation.
• You need to select the language, keyboard, host name and time zone.
• Then you need to set root password.
• You need to configure the disk partition.
Hard Disk Partition
• If you have only one primary drive, you should let the system configure the drive.
• If you are having mixed partition with the Windows File System; then you need to configure the partition yourself.
Manual Configuration of Disk Partition
• Create 1 partition (100-200 MB) using ext3 file format with mount point ‘/boot’
• Then create a logical partition for swap file. The size should be twice your available system memory.
• Then use the rest of available hard disk space to create 1 partition using ext4 file format with mount point set as ‘/’
• Alternatively, you might consider separate partition for ‘/home’ or ‘/var’
Setting Boot Loader
• In Fedora, the boot loader (Grub) must be loaded into sda.
• If you indicate otherwise, the system assume you are using other boot loader as the primary boot loader, then you need to configure your primary boot loader to point to secondary boot partition for chain loading
• For those who prefer to create every MBR in every drive, you must unplug all drives from the system while installing fedora. Note: you must physically unplug the drive as Fedora would still able to recognize any additional hard disk even if you disabled the drives using BIOS.
Completion of the Installation
• After the system completed its copy of file images, you need to reboot once in order to complete the installation.
• During the final phase, you need to accept license, create a user and you are given an option to choose authentication method. For normal user, there is no need to configure authentication method.
• You need to set date and time. After which you are given a choice to send hardware profile.
• Finally, you are prompt to login using the user you have created. At this stage the installation is complete.
• Updating Fedora is as easy as Windows and it is automated. You will notice a message indicate that you need to update the OS. Follow the direction in the message will bring to the update manager and follow the instruction.
• You can also use command yum to update the system. Open a terminal window, type $su –
• Enter root password
• Type #yum update
• If there are some drivers are not being recognize or configured properly, you can download the drivers and install it.
Installing Creative X-FI Sound Blaster 64-bit driver
• The driver from Creative Lab is no good for Fedora. You to download ALSA driver from the website http://www.asla-project.org
Steps to Install Sound Blaster Linux Drivers
1. Download ALSA driver from ALSA web site. Extract the folder.
2. Open a terminal window and navigate to target folder.
3. Type $su – to get root access.
4. You need to install kernel source and development package before installing drivers.
5. #yum install binutils gcc make patch libgomp glibc-headers glibc-devel kernel-headers kernel-devel
6. After completion, proceed with the followings: #./configure
8. #make install
9. This should complete the installation.
Installation and Configuration of Commonly used Applications
• Most of the popular applications are preloaded with Fedora; you might need to add some plug-ins.
• For additional software you can install using System >> Administration >> Add/Remove Software. The utility will search for the application you intended, download it and install it automatically.
• You can also use command line (yum) to install the software packages.
• Fedora uses yum to install and update its software. When connected to the internet it will automatically determine application dependencies.
• Yum automatically connect to the official mirror sites of Fedora to retrieve latest software packages.
• You might want to add additional repositories that provide additional software. Two additional sites are recommended, one is rpmfusion.org, the other is livna.org
To setup repos from rpmfusion:
•#rpm -ivh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm
•#rpm -ivh http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
Setting up repos from livna.org
• #rpm -ivh http://rpm.livna.org/livna-release.rpm
• #rpm –import /etc/pki/rpm-gpg/RPM-GPG-KEY-livna
Installing Yum plugin
• While yum has many plugins available, I would recommended you to install the fastestmirror plugin, it speeds up downloads by attempting to find faster sources.
• To install the plugin:# yum install yum-plugin-fastestmirror
• To install software using yum just use the command: #yum install
• To find out details about the software packages use the command: #yum info
• You can also perform group install using #yum groupinstall
• The following software only available in 32-bit version. If you really need them, you might want to recompiled into 64-bit.
• Some 32-bit software like OpenOffice runs well in 64-bit OS. Some software may have installation problem due to the difference.
o Adobe Air
o Adobe Reader
o Foxit Reader
• Firefox is preloaded with Fedora; you just need to install additional plug-ins.
Firefox Plug-ins: Google Toolbar
• Go to the site where Google toolbar is hosted and install directly from the web.
Firefox Plug-ins: Adobe Flash Player
1. The flash player can be downloaded at http://get.adobe.com/flashplayer/. Download the package to begin installation.
2. Save the .rpm file. Quit your browser.
3. Open a terminal window and get root access.
4. Navigate to the directory and run the following command
5. #rpm -ivh flash-plugin-10.0.32.18-release.i386-rpm
6. Launch your browser. To verify installation in Firefox choose Help > About Plug-ins from the browser menu.
• OpenOffice is not included in the LiveCD. To install it goto System >> Administration >> Add/Remove Software.
• Type openoffice in the search box and click find. With the list given, select the OpenOffice package you want.
• Fedora has default PDF reader (evince) so no installation is required.
• For 32-bit OS, you might consider install Adobe PDF reader or Foxit PDF reader.
• Fedora has built in PDF writer; here is the direction of how to use it.
o For Firefox, select print >> print to file, make sure you specify the document type as PDF and also specify the filename and location of the file.
o For OpenOffice, use ‘Export to PDF’ function.
• You will need a PDF writer if you intend to use it on any other application that do not have print to PDF or export to PDF capabilities. In this case, you need to install cups-pdf.
Playing Multimedia Files
• To play the most common multimedia formats, including MP3, Mpeg, rm, QuickTime, WMA and WMV, you need to install additional packages; when you install VLC Media Player, yum install will includes all the necessary codec.
• Playing DVD is more complicated because it involves restricted format. You need to install a DVD Media player and CSS Packages.
• Although Fedora comes with Totem Movie Player, it lacks DVD functions such as navigation through the menu, titles etc. I would recommend using VLC Player or Xine.
Installing Media Player
• To install VLC Media Player: #yum install vlc
• To set VLC as the default player, open any File Browser. Select Edit >> Preference >> Media
• To install Xine: #yum install xine xine-lib-extras xine-lib-extras-freeworld
Check Region Setting
• To check your region setting you need the package “regionset”.
• Open a terminal window with root access
• #yum install regionset
• After installation, from command line enter: $regionset
• Your region setting will be shown.
Installing CSS Packages
• To install the CSS packages use the command: #yum install libdvdcss
• In the event you need to rip or backup your DVD; you can install various DVD ripper.
• In this section we will install k9copy
• #yum install k9copy
• Please search for k9copy on direction of usage.